Dalapro Airless Hydro

Spray filler for wet rooms

Read less

• Blue, ready-mixed spray filler, especially for wet rooms.
• Produces a tough, water-repellent surface.
• Also suitable when an especially hard-wearing surface is needed.
• Approved for embedding paper tape.
• Suitable for both new production and renovation.
• Recommended for bigger jobs.

Product

Dalapro Airless Hydro

Email Facebook Twitter Linkedin

Descriptions
Application
Documentation

Product information

Dalapro Airless Hydro is a blue, ready-mixed spray filler for application in wet rooms. Also suitable when you want to create a particularly hard-wearing surface, such as in public premises. Suitable for all commonly used substrates on walls and ceilings indoors, such as plaster, concrete, wood and brick. The high binder content in the filler gives the product a tough, water-repellent surface and maximum adhesion to the substrate. The product is suitable for both joint filling and fine smoothing in both renovation and new production.

Instructions

Filler must be applied using a spray applicator on clean, dry and intact surfaces at a temperature of at least +5°C. Sand down the filled surface once it has dried. Use sandpaper with grain size 100–120. Eye and respiratory protection are recommended when sanding. Dust off before next treatment. Filled surfaces must be primed if they are to be wallpapered.

Use

Dalapro Airless Hydro is suitable for embedding paper tape. The product meets the CE-marking requirements in accordance with EN 13963 and is manufactured in accordance with ISO 9001 and ISO 14001. When finishing plasterboard: follow National guidelines and recommendations in accordance with EN 13963. Combined with CertainTeed Marco Spark-Perf joint tape, the product is suitable for joint filling on plasterboard.