Dalapro Edge - Extra high-filling hand filler with adhesive effect.

Dalapro Edge - Extra high-filling ready-mixed hand filler with adhesive effect.

Dalapro Edge

Extra high-filling hand filler with adhesive effect

Read less

• Superior filling capacity.
• One layer less on joints and cornerbeads & trims.
• For plasterboard and concrete.
• Approved for embedding paper tape.
• Nordic Ecolabelled.
• Patent pending 3943466A1.

Product

Dalapro Edge

Email Facebook Twitter Linkedin

Descriptions
Application
Documentation

Product information

Dalapro Edge is a ready-mixed hand filler with extra high filling capacity and adhesive effect that is equally effective on both plaster and concrete. The unique filling properties enable you to save one layer of application on plasterboard joints and cornerbeads & trims. The product also has minimal sinking over time. Dalapro Edge is approved for paper tape and suitable for use on cornerbeads & trims such as Habito, AquaBead and Levelline. Light grey. Nordic Ecolabelled. The patent process is under way. The technology behind the high filling capacity is protected by Patent Pending until further notice: EP 3943466A1.

Instructions

Apply by hand or with an automatic taping tools to clean, dry and intact surfaces. Fill the entire joint with filler, embed the paper tape and press firmly. Then apply filler directly over the paper tape. After drying, apply filler to the desired surface treatment requirements. When using automatic taping tools: mix before use. Temperature: minimum +5°C. Sand down the filled surface once it has dried. Use sandpaper with grain size 150–220. Eye and respiratory protection are recommended when sanding.

Use

Dalapro Edge is suitable for installing paper tape. Combined with Certain-Teed Marco Joint Tape, the product is suitable for joint filling on plasterboard. Meets CE-marking requirements in accordance with EN 13963. Manufactured in accordance with ISO 9001 and ISO 14001. When finishing plasterboard: follow National guidelines and recommendations in accordance with EN 13963.