Dalapro Design TopCoat

Surface treatment for filled surfaces
Read more
Read less
• Surface treatment that seals filled surfaces.
• Protects the surface against stains and dirt.
• Water-based.
• Ideal as protective surface for Dalapro Design.
• Produces a matt, wipeable surface.
• Easy to apply with paint roller or pressure sprayer.
• Quick-drying.

Product information

Dalapro Design TopCoat is a water-based surface treatment that reinforces filled surfaces, making them more resistant to impact, scratching and moisture. Produces a matt, wipeable surface. After application, the filler retains its rustic appearance and any colour variations are emphasised. Open to diffusion to allow surface to “breathe”.

Use

Used in combination with Dalapro Design and only in dry spaces indoors. Both material and substrate must have a temperature of +10°C – +25°C.

Apply Dalapro TopCoat using a foam rubber roller or a short-bristled paint roller in a consistent, thin coating. Repeat the application until you have achieved the desired end result. Normally requires at least two coats. The drying time is approximately 2–3 hours. Covers approximately 8 square metres per litre.

Preparations: Remove dust from the surface to be treated. Cover the floor, mask skirting boards, door frames and, if necessary, cornices.
Step 1: Apply Dalapro Design TopCoat using a foam rubber roller or a short-bristled paint roller in a consistent, thin coating. Quickly dab clean any run-off using a cloth. Otherwise there is a risk that this will be visible in the finished job. Allow to dry.
Step 2: Repeat the application until you have achieved the desired end result. Normally requires at least two coats.
If you want a stronger surface with a glossier finish, you can apply another coating of Dalapro TopCoat. Dalapro TopCoat can also be applied with a pressure sprayer. In that case it should be diluted with 1 dl water per 5 dl Dalapro TopCoat. Recommended distance from wall: 30–40 cm. Make sure you have a good sprayer pattern before you start.

Product data

Articles information
Product Name Article No. Packaging Colour
Product NameDALAPRO DESIGN TOPCOAT 1 L Article No.620640 PackagingBottle ColourTransparent

Instructional video

Create concrete-like walls with Dalapro Design
Inspire videos
Dalapro Design - Design filler that produces a vibrant, concrete-like surface

Documentation

Select all
Safety data sheet
5 datasheets related with the product
5 datasheets related with the product
Dalapro Design TopCoat (EN)
Dalapro Design TopCoat (FI)
Dalapro Design TopCoat (FR)
Dalapro Design TopCoat (NL)
Dalapro Design TopCoat (PL)
Product data sheet
3 datasheets related with the product
3 datasheets related with the product
Dalapro Design TopCoat (EN)
Dalapro Design TopCoat (FI)
Dalapro Design TopCoat (PL)
Product Catalogue
Handbook